SimScale simulation projects by sam123456 | Page 1

sam123456's profile

modification of mesh (i.e. modifying the run2 mesh)

wind around the buildings with 9 m per sec velcoty transient (sam)

wind around the buildings with 9 meter per sec  (sam)

modification of mesh (i.e. modifying the run1 mesh)

this is the initial simulation. interested to study the dispersion of co2, water vapor coming from the hotel exhaust present on the podium.

copy of Pollution of Air through Exhaust Gases from a Chimney

data center with snappy hex mesh copy of copy of copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

cfd dispersion of species run1 (initial simulation was with 2 m/s. now trying with with velocity 10 m/s)

Ricardopg changed the approach of velocity inlet of species to volumetric source generation as input in the project.

data center with snappy hex mesh copy of copy

Public Profile

sam123456's profile