SimScale simulation projects by rmarentette | Page 1

rmarentette's profile

This is RV2 - punched out nose cone to account for CubeSAT

trying again to make an enclosure - feb. 20th

cfd on punched out nose cone - feb 7th 2020

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

rmarentette's profile