Set up your own cloud-native simulation in minutes.Start Simulating Now
1
0
1 Geometry
1 Mesh
1 Simulation setup
11 ResultsFinite Element Analysis of a 3D Printed Transtibial Prosthetic Socket. The study evaluates the effects of socket wall thickness (3 mm, 4 mm, and 5 mm) and infill density (25%, 50%, and 75%) on structural performance under static loading conditions.
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
phuongpham2712 created this project
about 1 month ago
1 Geometry 1 Mesh 1 Simulation setup 11 ResultsFinite Element Analysis of a 3D Printed Transtibial Prosthetic Socket. The study evaluates the effects of socket wall thickness (3 mm, 4 mm, and 5 mm) and infill density (25%, 50%, and 75%) on structural performance under static loading conditions.
