SimScale simulation projects by nzaharia | Page 1

nzaharia's profile

Tutorial project to simulate external Aerodynamics of a futuristic car model

Tutorial project for heat transfer in an engine piston

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

This project simulates a U-Joint shaft being torqued to failure.

Simulation using the LBM solver available on SimScale.

In this project, I want to investigate the stress on the new YSL shoe, identify the proper material and design for the shoe to be stable and not break.

http://www.vogue.com/article/saint-laurent-heel-less-shoe-physics-paris-fashion-week-fall-2017-ready-to-wear

This project simulates the natural convection in a kitchen

This project shows the mixing and moving of granular particles through a screw conveyor.


The air flow around a football is simulated with focus on the effects of the pattern on the football surface and spinning of the ball.

This project shows how to simulate the airflow inside an office space.

This project shows the simulation of a sneeze on a plane and how the sneeze flows throughout the plane 

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Conjugate heat transfer analysis of a heat sink, copy project from tutorial.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

The goal of this project is to simulate the air conditioning in a movie theater and ensure thermal comfort for the spectators.

Public Profile

nzaharia's profile