SimScale simulation projects by mmcconaha | Page 1

mmcconaha's profile

dual cross flow filters and bent tailpipe fins

Test the pressure drop when the fins are bent to redirect flow to walls

muffler with honeycomb porous media in tailpipe

same as other one, but 11 inches instead of 4

find pressure drop of honeycomb structure 4 inches in length

same as other one, but 11 inch instead of 4 inch

the honeycomb is half as thick as it was before

test porous media coefficients from previous tests

run with different thickness of porous region

honeycomb run but replacing honeycomb with porous medium approximation

Same as dual cross flow sim, but without cross flow filters

simulation with addition of cross flow filters in tailpipe

same as dual cross flow sim but without the cross flow filters

Conjugate heat transfer simulation tutorial.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for the flow of fluid through a pipe junction

Public Profile

mmcconaha's profile