SimScale simulation projects by kevinlsx007 | Page 1

kevinlsx007's profile

Breaking force analysis of 0.5x0.5 mm beam.

Breaking force analysis of 2 1.2 x 0.8 mm support flakes.

Breaking force analysis of 1.2 x 0.8 mm support flake.

Breaking force analysis of 1 x 0.4 mm soft lock.

Bending analysis of cantilever with 0.5 mm undercut.

Breaking force analysis of 1 x 0.5 mm soft lock.

Breaking force analysis of ABS cantilever with 1 mm soft lock.

Breaking force analysis of 0.55x0.55 mm beam.

Breaking force analysis of 0.52x0.52 mm beam.

Breaking force analysis of 0.54x0.54 mm beam.

Breaking force analysis of 0.6 mm-thick beam.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

kevinlsx007's profile