SimScale simulation projects by jperim | Page 1

jperim's profile

6 DOF validation test for free heave motion of floating cylinder

Tutorial project for setting up a Multi-phase flow simulation.

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

This  project analyzes the aerodynamics of a spoiler

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

jperim's profile