Set up your own cloud-native simulation in minutes.Start Simulating Now
297
0
1 Geometry
1 Mesh
1 Simulation setup
1 Result2.4mm Y with 1.6mm tubing, rotated so that inlet is on x-axis
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
johnsc28 created this project
almost 7 years ago
1 Geometry 1 Mesh 1 Simulation setup 1 Result2.4mm Y with 1.6mm tubing, rotated so that inlet is on x-axis
