Set up your own cloud-native simulation in minutes.Start Simulating Now
157
1
1 Geometry
5 Meshes
1 Simulation setup
3 ResultsThis project aims at simulating the flow inside a piping distribution system. The objectives are to observe the velocity profile throughout the system, assess the pressure distribution, quantify the pressure drop, and monitor the flow rates at the outlets. The results provide valuable inputs to making better decisions at the early stages of the design process, reducing time and cost within an industrial product development workflow.
by dheinydheiny
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
1 Geometry 5 Meshes 1 Simulation setup 3 ResultsThis project aims at simulating the flow inside a piping distribution system. The objectives are to observe the velocity profile throughout the system, assess the pressure distribution, quantify the pressure drop, and monitor the flow rates at the outlets. The results provide valuable inputs to making better decisions at the early stages of the design process, reducing time and cost within an industrial product development workflow.
9fea8551-1ff1-4da1-a8d2-da83edcea07f created this project
about 7 years ago
icojocnean copied this project
over 6 years ago
