SimScale simulation projects by dhinojal | Page 1

dhinojal's profile

Do a Simscale simulation of our intake manifold ( assuming that from air inlet to the last intake valve enter, there is a maximum length of 1.2m, and the drop should not exceed 150 Pa

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

dhinojal's profile