SimScale simulation projects by dfoxhw | Page 1

dfoxhw's profile

Test enclosure heat sink ability with fins.

Comparison cooling of a simple flat panel.

Test out what kind of heatsink is required for convection cooling of an electronics board.

Test thermal characteristics of cone shaped heatsink.

Model convection heat sinking of an auxillary board.

Test the effect of lengthening the fins of a heatsink.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

This tutorial shows how to analyze the Heat transfer in a heat sink.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

dfoxhw's profile

Forum Activity