SimScale simulation projects by d5ed3877_83a5_ | Page 1

d5ed3877_83a5_'s profile

This project demonstrates how to compute the acoustic eigenfrequencies of a muffler

A contact analysis of a consumer snap fit mechanism is analyzed in this project.

Most renewable energy sources (including wind energy), including fossil fuel energy, comes from the sun. Overall, hourly, the sun provides the earth with over 175 Trillion kilowatt hour of energy. Of this energy, about 1-2 percent of this is converted to wind energy. The places on the equator are more directly heated compared to the poles. This leads to significant global wind systems. in addition, the local environment like the presence of cities, water bodies, forests alter the local wind profiles in any area. In the last decade, an emphasis on renewable energy sources and rapid growth of wind farms has led to significant decrease in associated costs.

The wind turbines developed in the 1980s became the breakthrough for the modern turbines. The wind rush that started in the 80s suddenly ended overnight when the California government stopped its support schemes. In the last decade starting 1998, the MegaWatt sized turbines and large wind farms have revolutionized the wind energy industry and making it a potent source of renewable energy. Spearheading this revolution has been Denmark and Germany, who are also the largest wind energy markets.

This project explores ideas for usage of SimScale and exploitation of its features towards design, simulation and optimization of the power output of wind farms.

In this project, a dynamic nonlinear impact analysis of a human skull with helmet is performed

Convergence analysis for different situations: Notched plate, incompressibility, shear locking during bending

A casing of a mobile phone is tested when being dropped from 2 meters height.

A compressible airflow through a valve is analyzed.

This project shows an example of using a porous media within a thermo-fluid analysis.

This project simulates a Centrifugal water pump.

This project shows the frequency analysis of the truss bridge for first 20 eigenmodes.

The project illustrates how to simulate airflow around a complex F1 vehicle.

The stress distribution within an impeller is analyzed under vibration load due to bearing tolerances.

In this project a static structural analysis of a gripper arm is demonstrated.

This project simulates convective flow inside a Light Bulb.

This project demonstrates a multiphase flow simulation of a waterfall.

This project shows the mixing and moving of granular particles through a screw conveyor.

This project simulates a water purification process in a maze channel reactor.

This project simulates transient wake formation behind a boat.

This project simulates instantaneous turbulent wake of a cylinder body via LES method.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions.

Public Profile

d5ed3877_83a5_'s profile