SimScale simulation projects by chris_dutton | Page 1

chris_dutton's profile

Get practice using the mesh / filtering / material porosity option to replicate air being pushed through a filter.

3D Printer default Nozzle Duct for Creality / Ender range. 
To understand the airflow around the nozzle as a control experiment as the cooling effect is influenced by the direction of travel. i.e. cooling is greater if the direction is away from the duct placing, and worst in the opposite direction where the layed material is furthest from the cooling duct.
 
To be followed up with more refined designs (if necessary) that provide better all round airflow.

Incompressible Fluid Flow analysis of two globe valves

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Copy of Ali_Arafat Radial Fan Blade Comparison to get a better understanding of how the model was built before trying to create my own Fan blade design comparisons

Tutorial for In-compressible Turbulent flow through a cyclone seperator

Public Profile

chris_dutton's profile