Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 25

multiphase modelling with volumetric force

Tutorial - Multi-Phase Flow - Tank Filling

Wave Impact on an Offshore Oil-Rig Platform

Tutorial project for setting up a Multi-phase flow simulation.

PUCV Lab Project - Obstacles in Open Channel

CFD - flow  inside  riser - bubble ascension

The goal of the project was to demonstrate the hydraulic jump and find the height of the jump also compare simulation height with the calculated height. For this project, I used a multiphase simulation type (air and water).

A large eddy simulation of the breakup and atomization of a liquid jet
into a cross turbulent flow at various spray conditions

This is a project from simscale public library

Copy of @Kai_himself's project to test structured meshes.

investigating the aerodynamics of an object dropped into a tower of water

Learn how to use free surface in simscale

In this exercise, you will work with the hex-parametric mesher to mesh a valve geometry. Check out www.simscale-academy.com for more classes on simulation.