Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 2

Droplet Release Evaluation
Phase 0: Air
Phase 1: Water
Half Model

A A-class catamaran hull, goal is to use a multiphase simulation and estimate the hull performance

This project simulates transient wake formation behind a boat. - Copy

Trying to find the River turn speed gradient based on the river flow registered by the hydroeletric plant

This project simulates transient wake formation behind a boat. - Copy - Copy

This project is to analyze the uncombusted flow ln and around a Bluff Body burner

To decrease the sloshing effect with addition of baffle

To observe the sloshing effect with and without baffles

I will try to mix H2 with CNG with set boundary conditions

interfoam towing tank
Hector Espinoza 2020
cite this as:
Espinoza, H. et al, CFD Analysis of Ship Hull, In Preparation, 2020 - Copy

Caso de burbujeo del trabajo de Sarache et. al (2021)

Hierbij een algemene projectbeschrijving van dit zeer generieke project.