Electronics & High Tech

From electronic chips and printed circuit boards (PCBs) to smartphones or computers, SimScale is the perfect tool for electronics simulation, enabling companies to ensure power optimization, durability, efficiency or thermal performance for their products. | Page 93

Demonstration project of an electronics enclosure using CHT v2. Comparison different passive heat sink designs and comparison of active and passive cooling - Copy - Copy

to create microcontroller interfaced gps and gsm module

Simulación CHT de una Rpi4b simplificada - Copy - Copy - Copy

This project simulates a solid-state relay under a 15W heat load. 
This relay includes a heat sink that acts as a fixture from the relay housing to the mounting wall. The product is tested under natural convection conditions at 20C. 

Credits to Xinchao Song for the 3D model used in this project.  Link : https://tinyurl.com/ycd6cvug

Effects of heat on a microcontroller chip.

The goal of this project is to simulate the simplified version of the cooling system of the HP Workstation Notebook.
This is a Conjugate Heat Transfer (CHT) problem. Incompressible turbulent flow was assigned for the air flow. Two cooling scenarios are going to be investigated
1- Current cooling system 
2- External cooling fan assisted system - Copy

chip cooling optimum position - Copy - Copy