Electronics & High Tech

From electronic chips and printed circuit boards (PCBs) to smartphones or computers, SimScale is the perfect tool for electronics simulation, enabling companies to ensure power optimization, durability, efficiency or thermal performance for their products. | Page 8

testing the force on wire carrying current

This project analyzes heat transfer in a PCB with three heat-generating resistors. It simulates how heat spreads through the board and escapes to the environment via convection. The focus is on calculating total heat loss and ensuring safe temperature limits for electronic components.

Vertical setup of generator driven by water pressure

Simulation of airflow and heat transfer in a small data center to evaluate cooling strategies."

Check EFields from piezos in optical cavity - Copy

check the selected heat sink performance for the heat source

This project involves the development of a testing setup for an automated prosthetic leg, featuring a 350 mm mild steel shaft, two plates supporting a 4 kg wood piece load, and a 3 Nm torque stepper motor controlled by an Arduino Uno and DM556 driver. The setup simulates ±90-degree rotations over 10 seconds to mimic gait cycles, with a focus on moment analysis and stability under ISO 10328:2016 standards. Future improvements include integrating EMG signals from a human residual limb to replicate natural gait and implementing adaptive control for enhanced prosthetic testing. The system is powered by a regulated power supply and validated through MATLAB and ANSYS simulations.

Thermal simulation of 2 pcs of AD9680 and accompanying power supply

Electromagnetic simulation of an induction cooker