SimScale simulation projects by bogdanelloo | Page 1

bogdanelloo's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project simulates incompressible flow through an industrial scale Butterfly Valve.

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The idea of the project is to study the trim angle of the hull at different boat speeds, after that, it would be nice to check the resistance against Savitsky's prediction method.

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

The aim of this project is to investigate and optimize the flow pattern by minor modifications in the conventional design of an Air Intake System in order to improve the pressure loss and flow characteristics. The understanding developed with reference to recirculation flows and non-uniform flow over the whole air intake system, provides valuable insights in optimization of components for better efficiency.

Hulk is strong, so the simulation is strong!

Public Profile

bogdanelloo's profile