SimScale simulation projects by balianirudh | Page 1

balianirudh's profile

Nozzle and load cell assembly of head assembly (version B5-V3) with 1/8 inch alumina oxide fiber insulation around load cells

Heat transfer simulation of nozzle (version B4-V2)

Heat transfer and thermomechanical simulation of nozzle (version B3-V9)

Heat transfer and thermomechanical simulation of nozzle (version B3-V9c). Determining optimal geometry for integrated heat exchanger on nozzle.

Heat transfer simulation of nozzle with cooling channels (version B3-V9b)

Heat transfer simulation of nozzle (version B3-V9)

Heat transfer and thermomechanical simulations for preheating plate (version B2-V5)

Heat transfer simulation of preheat plate (version B2-V5)

Heat transfer simulation of preheating plate (version B2-V2)

NOTE: Only change between B2-V1 and B2-V2 is that V2 includes ceramic insulation sleeves around the carriage mounting bolts.

Heat transfer simulation of preheating plate (version B2-V2)

Heat transfer simulation of preheating plate (version B2-V1)

Heat transfer simulation for preheating plate (version B1-V5)

Heat transfer simulation for preheat plate (version B1-V4)

Heat transfer simulation for preheating plate (version B1-V3)

Heat transfer simulation of preheating plate (version B1-V2)

Heat transfer simulation of preheating plate (version B1-V1)

Determining the temperature gradient of an alumina ceramic nozzle. Simulation assumed welding wire has a constant temperature of 1600C.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

balianirudh's profile

Forum Activity