Set up your own cloud-native simulation in minutes.Start Simulating Now
Austria - Plate no. 1 (ME0041L)
0
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
2 Results
1 Geometry 1 Mesh 1 Simulation setup 2 ResultsAbout this project
To submit the requirements for Plate no. 1 of Machine Design 2 (Lab) with the following guidelines: - Create the simulation and select the 'Static' analysis type for this simulation. - Set the material of the beam as 'Steel' and apply a fixed support boundary condition at one of the end face of the beam. - Apply a 1 kN force at the other end of the beam in the -z direction. - Run the simulation without changing mesh settings and answer the questions in this assessment.
