SimScale simulation projects by abackup | Page 1

abackup's profile

This project involves the compression test of a polymer. 

Original project of @cyril

In this project, thermostructural analysis of two different designs of spark plug were performed

This project shows the nonlinear static analysis of a bridge elastomer bearing pad.

This project is done in order to compare the results obtained using modal dynamic solver to the one produced by standard transient dynamic solver.

Laser Hardening of Helical Gear - Original project of @pratikwalimbe

Heat Transfer Analysis of burner - original project of @jopoy

This project shows the bending of the copper beam done through a half ring mold.

In this project a steady-state thermal analysis of a hollow sphere with internal radiating surface is demonstrated.

Simple transport bracket stress analysis while lifting a heavy weight. Original project of @Duffman

This project demonstrates the stress analysis of a large steel structure.

Original project of @pcachot.

This project demonstrates full-fledged working of a car monoshock wishbone suspension system.

This project demonstrates the benefit of using modal dynamic analysis case over a simple linear dynamic analysis case.

This project demonstrates the stress analysis of femur bone subjected to different amounts of load.

Pre-stressing of the bolt is demostrated.
Original project of @potyka_csaba

Calculate number of screws (min. distance between them) necessary to compress the automotive electronic gasket and ensure tightness between top and bottom housings for ip67 standards.

Original project of @mydlikowskij

This project demonstrates the analysis of a mechanical arm using all available structural solvers on SimScale.

In this project tension, torsional and bending load tests of a hyperelastic rubber bellow is performed.

This project demonstrates the use of elastic support boundary condition in order to replace spring functionality in a pneumatic actuator. 

This project shows the bending of copper wire done through a rolling process.

This project performs the nonlinear static equibiaxial tension of a cube.

This project performs the nonlinear static planar (pure shear) tension of a cube.

This project performs the nonlinear static uniaxial tension of a cube.

Temperature decrease analysis - Original project of @ybuurman

This project shows the nonlinear static analysis of a car suspension.

This project demonstrates roller bearing analysis.

This project shows the stress analysis of a rocker bike part.

This project shows the frequency analysis of the truss bridge for first 20 eigenmodes.

In this project thermomechanical analysis of a bimetallic strip is demonstrated.

This project shows the nonlinear thermomechanical simulation of parallelepiped whose young modulus is function of the temperature.

This project shows the thermo-structural analysis of a cracked pipe.

In this project a transient thermal analysis of a perforated plate with is demonstrated.

This project shows the thermal analysis of a LED with Insulated Metal Substrate - IMS - mounted on different heat sinks.

In this project a thermal analysis of a laser beam welding (LBW) was performed.

bars test - original model or alistardean

Exercise for Session 4 of FEA Professional Training: Dynamic analysis with SimScale. 
To register for professional training, please follow this link: https://www.simscale.com/professional-training/

This acoustics simulation shows the frequency analysis of the Olympic Tower in Munich with first ten natural eigenfrequencies.

This nonlinear static analysis shows the sliding of a rubber seal on a rigid body due to applied displacement.

In this project frequency analysis of a thick cylinder is demonstrated.

In this project drop of a drone on a rigid plate was simulated.

Original project of @rszoeke

Modal Analysis of fan

Original project of dario.

Bend plate Y 0.02m modal analysis.

Original project of @kaz_puttenaers

This project shows the thermo-structural analysis of a pressure vessel with temperature-dependent material properties.

In this project a structural analysis of a sheet metal chassis (1mm, castellated, braced and light-weighted) was performed.

This project is a copy of one of the project from @MBCdesign.

2 body heat transfer - Original project of @bgeswein

This project shows the thermostructural analysis of basket strainer.

Public Profile

abackup's profile