SimScale simulation projects by YogeshwarDash | Page 1

YogeshwarDash's profile

A threaded joint is subjected to a tensile load of 5000 N with a temperature of 100 C. The outer surfaces of the treaded joint are applied with convection of 20 W/m2-K, while keeping the other end fixed. Determine the von mises stresses along with the temperature distribution along this threaded joint.

Simulation 8 Determine the temperature and heat flux distribution over an exhaust pipe made up of aluminium alloy whose inner surfaces are exposed to hot flue gases with a temperature of 2000 C; while the outer surfaces are subjected to a convective film heat transfer coefficient of 20 W/m2-K.

Determine the von mises stress and displacement for a bridge and state whether it is capable of carrying load of 100 persons at a time considering 100 kg for each person. Assume the material of the bridge as iron, determine the stress concentration regions or areas where there will be more chances of failure.

An oldham's coupling of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N seperately in three different cases. Determine the von mises stress and displacement contours and state whether the oldhams coupling joint should be used or not and in which cases the stress and displacement are lowest.

Public Profile

YogeshwarDash's profile