Set up your own cloud-native simulation in minutes.Start Simulating Now
0
0
1 Geometry
2 Meshes
1 Simulation setup
2 ResultsThis activity moves from laminar to turbulent flow and establishes the link between the turbulence model chosen and the mesh required to support it. The same fully developed pipe flow from Activity 1 is repeated at a Reynolds number of 50,000 using two combinations: a k-epsilon model with wall functions on a mesh sized for y+ between 30 and 100, and a k-omega SST model on a mesh resolved to y+ of approximately 1.
by mwavinyamwavinya
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
KhanLiya created this project
19 days ago
1 Geometry 2 Meshes 1 Simulation setup 2 ResultsThis activity moves from laminar to turbulent flow and establishes the link between the turbulence model chosen and the mesh required to support it. The same fully developed pipe flow from Activity 1 is repeated at a Reynolds number of 50,000 using two combinations: a k-epsilon model with wall functions on a mesh sized for y+ between 30 and 100, and a k-omega SST model on a mesh resolved to y+ of approximately 1.
