SimScale simulation projects by ChuckKey | Page 1

ChuckKey's profile

This is a copy of the version BenLewis made for help purposes

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Exploring the design and performance of a tiny centrifugal pump in which viscosity and friction predominate, using CFD. Using hot water, with lower viscosity and density than 'standard' water

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

FEA on braking system of early locomotive replica

try again while leaving first failed simulation intact for help

The handbrake involves cantilevered pins which warrant stress analysis

Public Profile

ChuckKey's profile