Set up your own cloud-native simulation in minutes.Start Simulating Now
428
1
0 Geometries
0 Meshes
0 Simulation setups
0 ResultsThis is an air filtration unit that I have already build. It consists of 2 filters, a 3rd one to be added. HEPA F7 HEPA H14 the HEPA G4 filter needs to be added. It also uses a CA/LINE31 Centrifugal inline FAN And at the exit, it has a 20mm thick 6.4mm hole opening Aluminium Honeycomb. The Box is out of wood and actually is a crate :) The measured airflow at teh face is just below 1m/s
BogdanBelcea created this project
over 5 years ago
0 Geometries 0 Meshes 0 Simulation setups 0 ResultsThis is an air filtration unit that I have already build. It consists of 2 filters, a 3rd one to be added. HEPA F7 HEPA H14 the HEPA G4 filter needs to be added. It also uses a CA/LINE31 Centrifugal inline FAN And at the exit, it has a 20mm thick 6.4mm hole opening Aluminium Honeycomb. The Box is out of wood and actually is a crate :) The measured airflow at teh face is just below 1m/s
by ananthu_ajitananthu_ajit
by dlynchdlynch
