SimScale simulation projects by AlexFernandes | Page 1

AlexFernandes's profile

Perrinn F1 Aerodynamics
Full car simulation, no MRF, no porous media.

This project contains resources for Session 1 of the F1 Workshop

Analyzing the behavior of the new front wing, which uses E420-il profile for main wing and flap.

The effect of numerics on the simulation quality and convergence time.

Structural analysis of bending and torsion of a wing frame.

Change the AOA of a RC airplane wing.
From 3 to 20 degrees, check its influence in CL and CD

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

FSAE-Workshop-S3- Yaw angle- Analysis-Simulation

Homework for session 1 of FSAE 2017 workshop

Project for the session 1 homework, concerning rake angle and multiple ride heights

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

AlexFernandes's profile