'Validating Wind Loads on an Isolated Building' simulation project by kcontractor


#1

I created a new simulation project called 'Validating Wind Loads on an Isolated Building':

This project is aimed at validating SimScale's incompressible flow solver for building wind loads posed on an isolated building. The experiments were performed at the Japan Architectural Institute.


More of my public projects can be found here.


#2

Introduction:


This project analyses the steady-state flow around an isolated building. The aim is to validate the flow around the building against experiments carried out at the Japan Wind Institute. An atmospheric boundary layer profile is implemented at the inflow.






#3

Introduction:


This project analyses the steady-state flow around an isolated building. The aim is to validate the flow around the building against experiments carried out at the Japan Wind Institute. An atmospheric boundary layer profile is implemented at the inflow.

Geometry and Physics setup:

Validation and Post-processing:
Velocity Streamlines imposed on Pressure Contours:

Longitudinal Velocity Comparison: