I created a new simulation project called 'Stress analysis of a large steel structure':

This project demonstrates the stress analysis of a large steel structure.

Original project of @pcachot.

More of my public projects can be found here.

I created a new simulation project called 'Stress analysis of a large steel structure':

This project demonstrates the stress analysis of a large steel structure.

Original project of @pcachot.

More of my public projects can be found here.

Original project of @pcachot.

In this project linear static stress analysis of a large steel structure was performed by fixing the lower feet and applying the load of 1000 kg on the top. Due to symmetry, the geometry was partitioned in to half along z-axis therefore reducing the mesh size and thus computation time. The geometry transformation is shown in the figure below.

Figures below show the results. Please note that in all these figures the deformation is scaled 100 times in order to see the deformed shape.

Hi Ahmed,

thank you very much for your help and your time, I will try to apply my

loads to see what I getâ€¦

Best regards

Pierre