# Sreamling analysis

**URL:** <https://www.simscale.com/forum/t/sreamling-analysis/101002>\
**Category:** Fluid Flow / CFD\
**Created:** [April 24, 2026, 10:22am UTC](https://www.simscale.com/forum/t/sreamling-analysis/101002 "2026-04-24T10:22:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![constantin07](https://www.simscale.com/forum/letter_avatar/constantin07/32/6_22734026db12803ebb3e059622ac3534.png) [@constantin07](https://www.simscale.com/forum/u/constantin07)\
**Post date:** [April 24, 2026, 10:22am UTC](https://www.simscale.com/forum/t/sreamling-analysis/101002/1 "2026-04-24T10:22:07Z")

</div>

I need help!! How i have to set it so I can see how my Wind Turbine Rotor in Wind.

---

<div class="post-metadata">

**Author:** ![BryanArsenio](https://www.simscale.com/forum/user_avatar/www.simscale.com/bryanarsenio/32/71634_2.png) [@BryanArsenio](https://www.simscale.com/forum/u/BryanArsenio)\
**Post date:** [April 27, 2026, 9:30am UTC](https://www.simscale.com/forum/t/sreamling-analysis/101002/3 "2026-04-27T09:30:45Z")

</div>

Hi @constantin07

To understand the workflow in setting up rotating zones you can take a look at these tutorials;

**[Drone Simulation Using Rotating Zones Tutorial](https://www.simscale.com/docs/tutorials/drone-simulation-rotating-zones/)**  
**[Water turbine Tutorial](https://www.simscale.com/docs/tutorials/advanced-tutorial-fluid-flow-simulation-through-a-water-turbine/)**

* * *

Essentially the workflow is:  
_Create a wind tunnel domain around the rotor_

- _Add a cylindrical rotating zone enclosing the blades_

- _Define the rotation axis and angular velocity_

- _Run the simulation, then use post-processing to display streamlines/velocity_

Thanks!  
Bryan