# Solver Error

**URL:** <https://www.simscale.com/forum/t/solver-error/81994>\
**Category:** Fluid Flow / CFD\
**Created:** [March 23, 2018, 11:47pm UTC](https://www.simscale.com/forum/t/solver-error/81994 "2018-03-23T23:47:04Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![kkotsarinis](https://www.simscale.com/forum/letter_avatar/kkotsarinis/32/6_449c533f586939b6e5f246632a46421f.png) [@kkotsarinis](https://www.simscale.com/forum/u/kkotsarinis)\
**Post date:** [March 23, 2018, 11:47pm UTC](https://www.simscale.com/forum/t/solver-error/81994/1 "2018-03-23T23:47:04Z")

</div>

I am trying to run a sim ( [https://www.simscale.com/workbench/?pid=8814826337149936545#tab\_1-0](https://www.simscale.com/workbench/?pid=8814826337149936545#tab_1-0) ) but when it reached Time=6 it crashed .What does this warning mean?

---

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [March 24, 2018, 8:50am UTC](https://www.simscale.com/forum/t/solver-error/81994/2 "2018-03-24T08:50:29Z")

</div>

Hi @kkotsarinis and thanks for reaching out to us!

The Community and I will have a look at that and get back to you as soon as we know more!

Cheers!

Jousef

---

<div class="post-metadata">

**Author:** ![Get\_Barried](https://www.simscale.com/forum/user_avatar/www.simscale.com/get_barried/32/20599_2.png) [@Get\_Barried](https://www.simscale.com/forum/u/Get_Barried)\
**Post date:** [March 24, 2018, 5:33pm UTC](https://www.simscale.com/forum/t/solver-error/81994/3 "2018-03-24T17:33:47Z")

</div>

Hi @kkotsarinis,

Your Specific turbulence dissipation rate [1/s] has a rather high value. Is this supposed to be correct?

Cheers.

Regards,  
Barry

---

<div class="post-metadata">

**Author:** ![kkotsarinis](https://www.simscale.com/forum/letter_avatar/kkotsarinis/32/6_449c533f586939b6e5f246632a46421f.png) [@kkotsarinis](https://www.simscale.com/forum/u/kkotsarinis)\
**Post date:** [March 24, 2018, 6:56pm UTC](https://www.simscale.com/forum/t/solver-error/81994/4 "2018-03-24T18:56:09Z")

</div>

Hi @Get_Barried  
Yes , i repeated the calculations and i don’t think it is that high as a value, comparing with other cases on fase cars.

---

<div class="post-metadata">

**Author:** ![Get\_Barried](https://www.simscale.com/forum/user_avatar/www.simscale.com/get_barried/32/20599_2.png) [@Get\_Barried](https://www.simscale.com/forum/u/Get_Barried)\
**Post date:** [March 24, 2018, 7:08pm UTC](https://www.simscale.com/forum/t/solver-error/81994/5 "2018-03-24T19:08:08Z")

</div>

Hi @kkotsarinis,

> [@kkotsarinis](#):
>
> Yes , i repeated the calculations and i don’t think it is that high as a value, comparing with other cases on fase cars.

The very high value is probably the issue. Try setting it to maybe a default value and see if you still have instability.

Cheers.

Regards,  
Barry

---

<div class="post-metadata">

**Author:** ![kkotsarinis](https://www.simscale.com/forum/letter_avatar/kkotsarinis/32/6_449c533f586939b6e5f246632a46421f.png) [@kkotsarinis](https://www.simscale.com/forum/u/kkotsarinis)\
**Post date:** [March 25, 2018, 10:03pm UTC](https://www.simscale.com/forum/t/solver-error/81994/6 "2018-03-25T22:03:48Z")

</div>

@Get_Barried Ι changed the value and the simulation did not crash.Now it calculates huge numbers of forces unfortunately .What may be the problem this time? ([SimScale](https://www.simscale.com/projects/kkotsarinis/project18_1/) )

---

<div class="post-metadata">

**Author:** ![Get\_Barried](https://www.simscale.com/forum/user_avatar/www.simscale.com/get_barried/32/20599_2.png) [@Get\_Barried](https://www.simscale.com/forum/u/Get_Barried)\
**Post date:** [March 26, 2018, 11:30am UTC](https://www.simscale.com/forum/t/solver-error/81994/7 "2018-03-26T11:30:08Z")

</div>

Hi @kkotsarinis,

Do you have any literature dictating the calculation of your Omega? This reference project [here](https://www.simscale.com/projects/yosukegb4/fp-023c_-_control/) has a much smaller Omega value, almost 10x smaller, which I believe is causing your high force values.

Cheers.

Regards,  
Barry

---

<div class="post-metadata">

**Author:** ![kkotsarinis](https://www.simscale.com/forum/letter_avatar/kkotsarinis/32/6_449c533f586939b6e5f246632a46421f.png) [@kkotsarinis](https://www.simscale.com/forum/u/kkotsarinis)\
**Post date:** [March 26, 2018, 1:01pm UTC](https://www.simscale.com/forum/t/solver-error/81994/8 "2018-03-26T13:01:04Z")

</div>

@Get_Barried  
I am following this tutorial ( [Session 1 - TUTORIAL - Ride Height Analysis](https://www.simscale.com/forum/t/session-1-tutorial-ride-height-analysis/81868) )where you can see that an even higher value of omega is used. Also I use the formulas used in this page ( [K-Omega and K-Omega SST | Global Settings | SimScale](https://www.simscale.com/docs/content/simulation/model/turbulenceModel/kOmegaSST.html) ) . Finally to double check the calculation i used also the spreadsheet given in this link ([CFD\_Calculator\_Formula\_SAE - Google Sheets](https://docs.google.com/spreadsheets/d/1LV_-y3TwOaOWnyQHgvjHVmzBEPuY_un6PFMJY45ozfU/edit#gid=1223612336)) that i found in this forum ([Step-by-Step Tutorial: Homework of Session 2 - #173 by jbin](https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-2/55690/173)). Thank you for your time!

---

<div class="post-metadata">

**Author:** ![Get\_Barried](https://www.simscale.com/forum/user_avatar/www.simscale.com/get_barried/32/20599_2.png) [@Get\_Barried](https://www.simscale.com/forum/u/Get_Barried)\
**Post date:** [March 26, 2018, 3:14pm UTC](https://www.simscale.com/forum/t/solver-error/81994/9 "2018-03-26T15:14:03Z")

</div>

Hi @kkotsarinis,

Yup it does seem you did everything correctly unless I missed something. Very peculiar indeed.

I’ll keep looking around but for now they might be able to give you a quicker response!

Cheers.

Regards,  
Barry

---

<div class="post-metadata">

**Author:** ![kkotsarinis](https://www.simscale.com/forum/letter_avatar/kkotsarinis/32/6_449c533f586939b6e5f246632a46421f.png) [@kkotsarinis](https://www.simscale.com/forum/u/kkotsarinis)\
**Post date:** [March 28, 2018, 1:44pm UTC](https://www.simscale.com/forum/t/solver-error/81994/10 "2018-03-28T13:44:48Z")

</div>

Did you find out what may be wrong? The Mesh Operation Event Log shows : " Mesh quality check failed. The mesh is not OK.Mesh quality report could not be created due to an invalid edge with zero or negative length in the mesh." but when I checked the meshing log and i found out this log:

Checking final mesh …  
Checking faces in error :  
non-orthogonality \> 75 degrees : 0  
faces with face pyramid volume \< 1e-16 : 0  
faces with concavity \> 80 degrees : 0  
faces with skewness \> 4 (internal) or 20 (boundary) : 0  
faces with interpolation weights (0…1) \< 0.01 : 0  
faces with volume ratio of neighbour cells \< 0.0075 : 0  
faces with face twist \< 0.005 : 0  
faces on cells with determinant \< 0.005 : 0  
Finished meshing without any errors  
Finished meshing in = 1679.65 s.  
End  
Finalising parallel run

---

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [March 28, 2018, 1:48pm UTC](https://www.simscale.com/forum/t/solver-error/81994/11 "2018-03-28T13:48:57Z")

</div>

Hi @kkotsarinis!

The mesh seems to be fine. Having a look as soon as I am home and will tell you if I could find anything.

Best,

Jousef
