# Solution Diverged Error

**URL:** <https://www.simscale.com/forum/t/solution-diverged-error/88384>\
**Category:** Project Support\
**Created:** [April 17, 2020, 1:07am UTC](https://www.simscale.com/forum/t/solution-diverged-error/88384 "2020-04-17T01:07:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rishi\_kumar](https://www.simscale.com/forum/letter_avatar/rishi_kumar/32/6_449c533f586939b6e5f246632a46421f.png) [@rishi\_kumar](https://www.simscale.com/forum/u/rishi_kumar)\
**Post date:** [April 17, 2020, 1:07am UTC](https://www.simscale.com/forum/t/solution-diverged-error/88384/1 "2020-04-17T01:07:16Z")

</div>

Hey everyone, I have a similar problem to this post: [Solution Diverged - Bad Elements](https://www.simscale.com/forum/t/solution-diverged-bad-elements/86885) but I just can’t seem to find the problem in my model? I have tried everything from moving my “fan” away from the wall to mesh refinements and changing the relaxation. Anyone has any suggestions?

> **[Coanda effect by rishi\_kumar | SimScale](https://www.simscale.com/projects/rishi_kumar/coanda_effect/)**
>
> investigating the coanda effect inside a room | Simulation project by rishi\_kumar

---

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [April 17, 2020, 10:23am UTC](https://www.simscale.com/forum/t/solution-diverged-error/88384/2 "2020-04-17T10:23:36Z")

</div>

Tagging @Retsam as well as @DaleKramer here. Andrzej, I think you worked on the coanda effect in the past and can give our user some useful tips on the issue? 👍

Cheers and take care!

Jousef

---

<div class="post-metadata">

**Author:** ![Retsam](https://www.simscale.com/forum/user_avatar/www.simscale.com/retsam/32/22410_2.png) [@Retsam](https://www.simscale.com/forum/u/Retsam)\
**Post date:** [April 17, 2020, 9:03pm UTC](https://www.simscale.com/forum/t/solution-diverged-error/88384/3 "2020-04-17T21:03:27Z")

</div>

@rishi_kumar: that project has nothing related to Coanda effect.

The problem is possibly linked to putting air into closed room, with no outlet for flow.

I suggest to replace your ‘fan’ with ‘ **momentum source** ’: You need to define a geometry of the size of your fan (a cylinder, suspended below your ceiling, not touching the ceiling) and use **Advanced concepts \> Momentum sources.**

Take care,

Retsam
