# Simulation Error **URL:** \ **Category:** Project Support\ **Created:** [November 1, 2017, 3:53pm UTC](https://www.simscale.com/forum/t/simulation-error/80979 "2017-11-01T15:53:50Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![EKT](https://www.simscale.com/forum/letter_avatar/ekt/32/5_5575768a8748004e209b776fc1b2916d.png) [@EKT](https://www.simscale.com/forum/u/EKT)\ **Post date:** [November 1, 2017, 3:53pm UTC](https://www.simscale.com/forum/t/simulation-error/80979/1 "2017-11-01T15:53:50Z")
Hi, I was trying to investigate my own FSAE car Followed by > [@Step-by-Step Tutorial Session 2 - Full Car Aerodynamics (Part 1)](https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878): > > Recording Homework Submission Your homework is to investigate the Full car model FSAE Full Car with a radiator using the [porous media approach](https://www.simscale.com/docs/content/simulation/model/advancedConcepts/porousMedia/porousMedia.html), rotating wheels using the [rotating wheel boundary condition](https://www.simscale.com/docs/content/simulation/model/boundaryConditionTypes/OF_rotatingWallVelocity.html), and rotation of the car rims using [Multi Reference Frame (MRF)](https://www.simscale.com/docs/content/simulation/model/advancedConcepts/rotatingZones/rotatingZones.html). For this case, the front wing flap angle of 0 degrees will be considered and the velocity of the car will be set at a constant 20 m/s. The step-by-step tutorial below contains all of the steps for setting up the simulation in Siโ€ฆ > [@Step-by-Step Tutorial Session 3 - Yaw Angle Study (Part 2)](https://www.simscale.com/forum/t/step-by-step-tutorial-session-3-yaw-angle-study-part-2/79720/): > > Link to part 1 of the tutorial: [Step-by-Step Tutorial Session 3 - Yaw Angle Study (Part 1)](https://www.simscale.com/forum/t/step-by-step-tutorial-session-3-yaw-angle-study-part-1/79719/1)Introduction Welcome to the second part of the step-by-step tutorial for the simulation of a Formula SAE full car with side wind. In this part of the tutorial we will show you the final steps for the simulation setup and we will go over the post processing of the results. Like last session, we will also go through some of the results and what they mean. Simulation Setup (Part 2) Numerics After definingโ€ฆ Simulation check was successful but Error occured! ๐Ÿ˜ฎ ![error](https://www.simscale.com/forum/uploads/default/original/3X/5/b/5b0df5fd7fbc67ea9d8f45598476a573868ca83a.JPG) I tried several settings and change meshes but experiencing same error ![error 2](https://www.simscale.com/forum/uploads/default/original/3X/7/3/737acd4eed2189ff0f3228b0cfdb14ec4ba9adf3.JPG) tried Simulation Control - End time value 1500, 5000, 6000 - Maximum runtime 42000, 50000 I have no idea what to do ๐Ÿ˜ข my project link is > **[body testing by EKT | SimScale](https://www.simscale.com/projects/EKT/body_testing_1/)** > > body testing | Simulation project by EKT > **[body testing by EKT | SimScale](https://www.simscale.com/projects/EKT/body_testing_2/)** > > body testing | Simulation project by EKT 1 is original and 2 is simplified mesh Thanks! ๐Ÿ˜Š ---
**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\ **Post date:** [November 1, 2017, 4:15pm UTC](https://www.simscale.com/forum/t/simulation-error/80979/2 "2017-11-01T16:15:02Z")
Hi @EKT and thanks for the very detailed post! We will have a look at that and come back to you as soon as we figured out a solution. Best, Jousef ---
**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\ **Post date:** [November 3, 2017, 10:07pm UTC](https://www.simscale.com/forum/t/simulation-error/80979/3 "2017-11-03T22:07:41Z")
Hi @EKT! I did not forget you ๐Ÿ˜‰ Currently trying to get a good mesh done without too many illegal faces. Getting back to you asap. Jousef ---
**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\ **Post date:** [November 4, 2017, 9:39pm UTC](https://www.simscale.com/forum/t/simulation-error/80979/4 "2017-11-04T21:39:14Z")
Hi @EKT! Have done three meshes as well as one simulation for your simplified model which can be found here: **[Body Testing Mesh](https://www.simscale.com/projects/jousefm/body_testing/)**. The same procedure can be used for your other model. Please let me know if everything works and if you need help! Best, Jousef ---
**Author:** ![EKT](https://www.simscale.com/forum/letter_avatar/ekt/32/5_5575768a8748004e209b776fc1b2916d.png) [@EKT](https://www.simscale.com/forum/u/EKT)\ **Post date:** [November 6, 2017, 3:22pm UTC](https://www.simscale.com/forum/t/simulation-error/80979/5 "2017-11-06T15:22:51Z")
Hi @jousefm! Thank you so much for your reply! sorry that I check your kind reply late ๐Ÿ˜‚ Iโ€™m following [SimScale](https://www.simscale.com/projects/jousefm/body_testing/) and apply to my project. After try several times and see what happens and reply to you again! Thanks!๐Ÿ˜„