# Simulation does not converge

**URL:** https://www.simscale.com/forum/t/simulation-does-not-converge/83071
**Category:** Project Support
**Created:** [September 11, 2018, 3:38pm UTC](https://www.simscale.com/forum/t/simulation-does-not-converge/83071 "2018-09-11T15:38:38Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![sengineering](https://www.simscale.com/forum/letter_avatar/sengineering/32/5_5575768a8748004e209b776fc1b2916d.png) [@sengineering](https://www.simscale.com/forum/u/sengineering)
#### Post date: [September 13, 2018, 7:12am UTC](https://www.simscale.com/forum/t/simulation-does-not-converge/83071/4 "2018-09-13T07:12:36Z")

</div>

Now simulation went better, but still the convergence plot is not ok.

 ![Screenshot_2018-09-13%20SimScale%20Workbench](https://www.simscale.com/forum/uploads/default/original/3X/3/b/3b0b5a8ec5e883f2b40fbd1367ed55b9d623453e.png)

---

_[View the full topic](https://www.simscale.com/forum/t/simulation-does-not-converge/83071)._