# Session 4: Vibrations

**URL:** <https://www.simscale.com/forum/t/session-4-vibrations/469>\
**Category:** Drone Workshop (2015)\
**Created:** [November 6, 2015, 3:47pm UTC](https://www.simscale.com/forum/t/session-4-vibrations/469 "2015-11-06T15:47:16Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [November 7, 2015, 10:11am UTC](https://www.simscale.com/forum/t/session-4-vibrations/469/3 "2015-11-07T10:11:56Z")

</div>

Hi @anon67859130 ,

finished my setup for both Levels now and found two little mistakes.

In [Homework of Session 4 - Level 2](https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-4-level-2/468) in the Material assignment for the battery you wrote volumeOnGeoVolumes\_0 in the text but its volumeOnGeoVolumes\_1 in the picture. Might be a little bit confusing for some guys here. Got an error at the end for assigning two materials on one component but found the mistake fast 😃

The second one is also in [Homework of Session 4 - Level 2](https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-4-level-2/468) at the point where we define the acceleration of the **Arm right lower point acceleration**. **Component selection: y displacement** is wrong it is more likely **Component selection: y acceleration**.

But these are just peanuts. 🕶

Cheers,

Jousef

---

_[View the full topic](https://www.simscale.com/forum/t/session-4-vibrations/469)._
