# Select volume

**URL:** <https://www.simscale.com/forum/t/select-volume/87849>\
**Category:** Project Support\
**Created:** [March 1, 2020, 5:24am UTC](https://www.simscale.com/forum/t/select-volume/87849 "2020-03-01T05:24:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![markII](https://www.simscale.com/forum/letter_avatar/markii/32/6_449c533f586939b6e5f246632a46421f.png) [@markII](https://www.simscale.com/forum/u/markII)\
**Post date:** [March 1, 2020, 5:24am UTC](https://www.simscale.com/forum/t/select-volume/87849/1 "2020-03-01T05:24:46Z")

</div>

A cell zone has been defined with assignments of faces. This is not supported. Please create a closed solid region that exactly represents your cell zone in your CAD tool. How do i solve this error??  
I use stl format cad , when i upload it ,it creates solid\_0 and my radiator comes under this and because of this it gets selected as a face and not as a volume

---

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [March 1, 2020, 1:42pm UTC](https://www.simscale.com/forum/t/select-volume/87849/2 "2020-03-01T13:42:32Z")

</div>

Hi @markII!

If you want to use MRF zones you have to make sure not to have a face but a volume. Faces are not allowed for a MRF zone which I assume you want to use?

Best,

Jousef
