Room air flow

Project Support
1

Here is a ROOM with a FAN on the right up against the wall. There are two other locations for the fan 1) Middle of the room 2) in the corner of the room. The fan produces 300CFM through a 200mm Pipe internal diameter. I need to see the degree of turbulence from the pipe in all three locations. Can somebody help me please…this is my first time using SimScale…thanks

I have copied the project but I do not see any way to upload it here. Can somebody help please.

2

Hi Paul!

Just copying the URL at the top should be enough for us to have a look at it.

Perhaps your setup could be similar to the one used in this validation case:

You can use the blue ‘View Projec’ button to check the setup and make a copy if you wish.