# Postprocessing - Result on selected body **URL:** \ **Category:** Post-processing\ **Created:** [June 24, 2016, 5:37pm UTC](https://www.simscale.com/forum/t/postprocessing-result-on-selected-body/29179 "2016-06-24T17:37:57Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![ahmedhussain18](https://www.simscale.com/forum/user_avatar/www.simscale.com/ahmedhussain18/32/140_2.png) [@ahmedhussain18](https://www.simscale.com/forum/u/ahmedhussain18)\ **Post date:** [June 24, 2016, 6:03pm UTC](https://www.simscale.com/forum/t/postprocessing-result-on-selected-body/29179/2 "2016-06-24T18:03:04Z")
Hwy @potyka_csaba! > [@potyka\_csaba](#): > > Task 1:I just want to check my results (solution field of an assembly). But I would like to check the results separated solid by solid. Is it possibel in SimScale or in ParaView? You can do that in local Paraview by hiding the block. First use extract block filter to extract the volumes only. Then just right click on the block in viewer and then click hide block. > [@potyka\_csaba](#): > > Task 2:How can I get the reaction force (and moment) results on boundaries or on contact surfaces? You can either do this in advanced solvers. Before you run the simulation, you can define the calculation item in **Result Control**. There you can plot the results based on volumes, faces, edges and points. If you want to do this using local Paraview, please follow this forum post: [How to get nodal solution results? - #2 by ggiraldo](https://www.simscale.com/forum/t/how-to-get-nodal-solution-results/27868/2) Following this forum the selection procedure of nodes will be same. Only difference would be that after selection you can apply Extract selection filter, then apply Plot selection over time filter. This will plot all the solution field data for those nodes. Then you can save the data while outputting it under files. --- _[View the full topic](https://www.simscale.com/forum/t/postprocessing-result-on-selected-body/29179)._