# Pipe bending simulation

**URL:** <https://www.simscale.com/forum/t/pipe-bending-simulation/82796>\
**Category:** Project Support\
**Created:** [July 17, 2018, 11:34am UTC](https://www.simscale.com/forum/t/pipe-bending-simulation/82796 "2018-07-17T11:34:21Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [July 17, 2018, 3:15pm UTC](https://www.simscale.com/forum/t/pipe-bending-simulation/82796/3 "2018-07-17T15:15:32Z")

</div>

Hi @tenshinshoden!

You could do a **[.csv upload](https://www.simscale.com/forum/t/defining-variable-constraint-or-load/22617)** of your load over time sheet and do a nonlinear static analysis if you like - that should work.

I am tagging @BenLewis, @cjquijano and @ggiraldo here, maybe they can give you some more input.

Best,

Jousef

---

_[View the full topic](https://www.simscale.com/forum/t/pipe-bending-simulation/82796)._