# Perforated Plate and its porosity

**URL:** <https://www.simscale.com/forum/t/perforated-plate-and-its-porosity/100660>\
**Category:** Using SimScale\
**Created:** [January 12, 2026, 1:38pm UTC](https://www.simscale.com/forum/t/perforated-plate-and-its-porosity/100660 "2026-01-12T13:38:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![vreijs](https://www.simscale.com/forum/user_avatar/www.simscale.com/vreijs/32/32289_2.png) [@vreijs](https://www.simscale.com/forum/u/vreijs)\
**Post date:** [January 12, 2026, 1:38pm UTC](https://www.simscale.com/forum/t/perforated-plate-and-its-porosity/100660/1 "2026-01-12T13:38:07Z")

</div>

What is the ‘Free area ratio’ in Perforated Plate? Is this the Optical or the Aerodynamic Porosity number?

See for the difference (Figure 8): Gonzales, Howell B. et al.: [Porosity and drag determination of a single-row vegetative barrier (Maclura pomifera)](https://www.ars.usda.gov/ARSUserFiles/24758/3.%20Porosity%20and%20drag%20determination%20of%20a%20single%20row%20vegetative%20barrier%20(002).pdf). In: Transactions of the ASABE 61 (2018), issue 2, pp. 641-652.

I would have thought that in CFD one uses the Aerodynamic Porosity, but if I look at the info around Perforated Plate’s Porosity I see that it is the ‘Free area ratio’ (which sounds very optical;-).

\<I ask it because my simulates come closer to measurements in the field when using Aerodynamic Porosity (derived from the Optical Porosity\>

Thanks for your help.

---

<div class="post-metadata">

**Author:** ![RicardoParis](https://www.simscale.com/forum/user_avatar/www.simscale.com/ricardoparis/32/30222_2.png) [@RicardoParis](https://www.simscale.com/forum/u/RicardoParis)\
**Post date:** [January 12, 2026, 7:00pm UTC](https://www.simscale.com/forum/t/perforated-plate-and-its-porosity/100660/2 "2026-01-12T19:00:01Z")

</div>

Hi,

The perforated plate model, as the name suggests, assumes that you have a perforated plate. Using it for other types of porous media may not be the best idea.

 ![image](https://www.simscale.com/forum/uploads/default/original/3X/5/f/5f981a70d99bd7476733ae032f53ce0f78a3c2b7.jpeg)

You can find the formulation used in[this book](https://www.simscale.com/docs/simulation-setup/advanced-concepts/porous-media/#:~:text=References-,VDI%20Heat%20Atlas,-.%20Second%20Edition.%20Springer).

---

<div class="post-metadata">

**Author:** ![vreijs](https://www.simscale.com/forum/user_avatar/www.simscale.com/vreijs/32/32289_2.png) [@vreijs](https://www.simscale.com/forum/u/vreijs)\
**Post date:** [January 12, 2026, 8:24pm UTC](https://www.simscale.com/forum/t/perforated-plate-and-its-porosity/100660/3 "2026-01-12T20:24:10Z")

</div>

I can understand it is not a match (my porous box of 2.2x_25x_0.35m and porous in the 0.35 direction); is in reality a fence made of bamboo stocks with an air gap in between. The optical porosity being 0.2 or 0.5. So I had hoped it is close to a perforated plate.

But I know, simulate reality is not easy.

Thanks for the link to the book.

All the best,
