# Outdated geometry

**URL:** <https://www.simscale.com/forum/t/outdated-geometry/87994>\
**Category:** Project Support\
**Created:** [March 16, 2020, 10:30am UTC](https://www.simscale.com/forum/t/outdated-geometry/87994 "2020-03-16T10:30:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mgardener](https://www.simscale.com/forum/letter_avatar/mgardener/32/6_22734026db12803ebb3e059622ac3534.png) [@mgardener](https://www.simscale.com/forum/u/mgardener)\
**Post date:** [March 16, 2020, 10:30am UTC](https://www.simscale.com/forum/t/outdated-geometry/87994/1 "2020-03-16T10:30:12Z")

</div>

Hi,

I tried to follow this example ([Step by Step Tutorial : Rubber Seal Sliding Analysis](https://www.simscale.com/forum/t/step-by-step-tutorial-rubber-seal-sliding-analysis/33433)) to learn more about this type of problem setup.

However it says the geometry is outdated and to re-import. I tried exporting to abaqus, exporting the assembly from there and re-uploading…but that just totally screwed everything up.

Any tips?

Many thanks,

Martin

---

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [March 16, 2020, 10:31am UTC](https://www.simscale.com/forum/t/outdated-geometry/87994/2 "2020-03-16T10:31:07Z")

</div>

Hi Martin!

Simply re-upload the geometry. So download it and re-upload it and you will be good to go 🙂

Let us know if that helped!

Jousef

---

<div class="post-metadata">

**Author:** ![mgardener](https://www.simscale.com/forum/letter_avatar/mgardener/32/6_22734026db12803ebb3e059622ac3534.png) [@mgardener](https://www.simscale.com/forum/u/mgardener)\
**Post date:** [March 16, 2020, 10:43am UTC](https://www.simscale.com/forum/t/outdated-geometry/87994/3 "2020-03-16T10:43:53Z")

</div>

Haha! That worked. I thought it was an out of date format or something!

Thanks!