# Meshing Error

**URL:** <https://www.simscale.com/forum/t/meshing-error/93244>\
**Category:** Project Support\
**Created:** [June 28, 2021, 7:39pm UTC](https://www.simscale.com/forum/t/meshing-error/93244 "2021-06-28T19:39:35Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![RicardoParis](https://www.simscale.com/forum/user_avatar/www.simscale.com/ricardoparis/32/30222_2.png) [@RicardoParis](https://www.simscale.com/forum/u/RicardoParis)\
**Post date:** [June 28, 2021, 8:13pm UTC](https://www.simscale.com/forum/t/meshing-error/93244/2 "2021-06-28T20:13:50Z")

</div>

Hello - I noticed that some of these contacts between the parts are rather complex.

In any case, all volumes are made of the same material, and all contacts are bonded, so there is room for simplification here. Have you already tried the valuable tip that Christopher mentioned in the [other thread](https://www.simscale.com/forum/t/setting-cad-up-for-torsional-tests/93234/2)? 🙂

 ![image](https://www.simscale.com/forum/uploads/default/original/3X/7/1/71f7498653fccae2b2e726c94dbb885f276c4944.png)

---

_[View the full topic](https://www.simscale.com/forum/t/meshing-error/93244)._
