# Mesh validity checks

**URL:** <https://www.simscale.com/forum/t/mesh-validity-checks/85020>\
**Category:** Using SimScale\
**Created:** [April 9, 2019, 6:57pm UTC](https://www.simscale.com/forum/t/mesh-validity-checks/85020 "2019-04-09T18:57:12Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![jhartung](https://www.simscale.com/forum/user_avatar/www.simscale.com/jhartung/32/23768_2.png) [@jhartung](https://www.simscale.com/forum/u/jhartung)\
**Post date:** [April 9, 2019, 10:52pm UTC](https://www.simscale.com/forum/t/mesh-validity-checks/85020/4 "2019-04-09T22:52:15Z")

</div>

Hi @jprobst, thanks for the update on this. The project is [here](https://www.simscale.com/workbench/?pid=6869950879105363263&mi=spec%3A4acb2a23-50f1-4cde-983f-e06e2d07baec%2Cservice%3AMESHING%2Cstrategy%3A47&sh=4). Be warned, it’s a big one with a lot of iterations. I’ve been following the process we’ve discussed in [this thread](https://www.simscale.com/forum/t/very-thin-boundary-layers-and-y-on-complex-geometry/84943/23), which is lengthy but worth the read if you’re involved in the meshing algorithm. From having played with it I’m concerned that most of the tutorials and help on the topic of meshing will result in a really bad mesh with almost non-existent boundary layer.

---

_[View the full topic](https://www.simscale.com/forum/t/mesh-validity-checks/85020)._
