# Mesh fail, self intersecting faces, indicate as outside of field

**URL:** <https://www.simscale.com/forum/t/mesh-fail-self-intersecting-faces-indicate-as-outside-of-field/97887>\
**Category:** Project Support\
**Created:** [December 19, 2023, 12:09am UTC](https://www.simscale.com/forum/t/mesh-fail-self-intersecting-faces-indicate-as-outside-of-field/97887 "2023-12-19T00:09:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![nhalliday](https://www.simscale.com/forum/user_avatar/www.simscale.com/nhalliday/32/45174_2.png) [@nhalliday](https://www.simscale.com/forum/u/nhalliday)\
**Post date:** [December 19, 2023, 4:06pm UTC](https://www.simscale.com/forum/t/mesh-fail-self-intersecting-faces-indicate-as-outside-of-field/97887/2 "2023-12-19T16:06:29Z")

</div>

Hello and welcome to SimScale!

I took a look at your model. I believe part of the issue is due to the fact that your starting geometry is a faceted .stl surface mesh, which can be problematic compared to a B-rep (CAD) part like a Parasolid or STEP file.

Are you able to convert this file to a CAD format, or go back to the original CAD (prior to .stl export) and work with that starting geometry? I know this conversion can be done in many CAD packages, however it will create a CAD face for each facet which is non-ideal. Getting the original CAD surfaces would be best.

A few other recommendations:

- Delete the slatted radiator and either block off this surface or replace with a comparable volume as a porous region. For simplicity, I would just block it off.
- Cut the tires at the static loaded radius/ride height (whichever is easiest to obtain) and consider extending small extrusions between the tire and road in this critical area. See these threads: [Mesh problems due to intersections](https://www.simscale.com/forum/t/mesh-problems-due-to-intersections/96500) , [Velocity field is diverging at a point - #2 by Ricardopg](https://www.simscale.com/forum/t/velocity-field-is-diverging-at-a-point/92559/2)
- It looks like you could exploit symmetry (about the y axis) on your model, assuming you do not want to simulate a yaw condition.
- Your tunnel could be a bit smaller in the y/z directions, which could cut down on the mesh size a bit.
- You could also experiment w/ the “Hex Dominant” meshing option in SimScale, which is often preferable for external vehicle aero simulations.

Please keep us posted on your progress…this is a great Miata model and should be very popular here on the Community!

–Nolan

---

_[View the full topic](https://www.simscale.com/forum/t/mesh-fail-self-intersecting-faces-indicate-as-outside-of-field/97887)._
