# .med file mistake upload failed

**URL:** <https://www.simscale.com/forum/t/med-file-mistake-upload-failed/95913>\
**Category:** Using SimScale\
**Created:** [July 13, 2022, 11:26am UTC](https://www.simscale.com/forum/t/med-file-mistake-upload-failed/95913 "2022-07-13T11:26:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![aburkitbayev](https://www.simscale.com/forum/letter_avatar/aburkitbayev/32/6_449c533f586939b6e5f246632a46421f.png) [@aburkitbayev](https://www.simscale.com/forum/u/aburkitbayev)\
**Post date:** [July 13, 2022, 11:26am UTC](https://www.simscale.com/forum/t/med-file-mistake-upload-failed/95913/1 "2022-07-13T11:26:48Z")

</div>

when I uploaded an already ready mesh file with .med file, then I can come up with this mistake.

Can anyone explain, please?

Upload failed

non-manifold-external-edge

Error Id: 1995b72f

---

<div class="post-metadata">

**Author:** ![ggiraldof](https://www.simscale.com/forum/user_avatar/www.simscale.com/ggiraldof/32/30298_2.png) [@ggiraldof](https://www.simscale.com/forum/u/ggiraldof)\
**Post date:** [July 13, 2022, 1:49pm UTC](https://www.simscale.com/forum/t/med-file-mistake-upload-failed/95913/2 "2022-07-13T13:49:55Z")

</div>

Hi!

I have not seen this error in the past. From what I understand, there is a problem with the mesh definition, like an edge that is not connected or is duplicate. Please check the mesh health and quality in your meshing software.
