# Manual input to Plot-over-Path points

**URL:** <https://www.simscale.com/forum/t/manual-input-to-plot-over-path-points/101457>\
**Category:** Product Feedback\
**Created:** [November 16, 2026, 9:35pm UTC](https://www.simscale.com/forum/t/manual-input-to-plot-over-path-points/101457 "2026-11-16T21:35:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![VictorReijs](https://www.simscale.com/forum/user_avatar/www.simscale.com/victorreijs/32/58298_2.png) [@VictorReijs](https://www.simscale.com/forum/u/VictorReijs)\
**Post date:** [November 16, 2026, 9:35pm UTC](https://www.simscale.com/forum/t/manual-input-to-plot-over-path-points/101457/1 "2026-11-16T21:35:35Z")

</div>

Dear Simscale,

It would be great to have manual input for the _Plot-over-path_ points. Now one has to use several _Cutting planes_ to get near the points one wants to input. So quite a lot of trial and error with th ecursor, while manual inputting them would be easier (at least for the user, perhaps the programmer needs to spend some time).

Thanks for considering this.

 ![afbeelding](https://www.simscale.com/forum/uploads/default/original/3X/d/5/d5b4f085f6f9e49fb5009b798ed233cf68d801c6.png)
