# Inflate boundary layer failure

**URL:** <https://www.simscale.com/forum/t/inflate-boundary-layer-failure/99575>\
**Category:** CAD & Meshing\
**Created:** [December 13, 2024, 11:15am UTC](https://www.simscale.com/forum/t/inflate-boundary-layer-failure/99575 "2024-12-13T11:15:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![hamish\_234](https://www.simscale.com/forum/letter_avatar/hamish_234/32/6_449c533f586939b6e5f246632a46421f.png) [@hamish\_234](https://www.simscale.com/forum/u/hamish_234)\
**Post date:** [December 13, 2024, 11:15am UTC](https://www.simscale.com/forum/t/inflate-boundary-layer-failure/99575/1 "2024-12-13T11:15:37Z")

</div>

The “inflate boundary layer” refinement seems to do nothing, I have played with the settings a lot but it is not working in my project:

> **[SimScale Login](https://www.simscale.com/workbench/?pid=1377320419977318098)**
>
> Log in to your SimScale account. SimScale makes high-fidelity engineering simulation technically and economically accessible. At any scale. In the cloud.

Any tips?

---

<div class="post-metadata">

**Author:** ![shenoy](https://www.simscale.com/forum/letter_avatar/shenoy/32/6_449c533f586939b6e5f246632a46421f.png) [@shenoy](https://www.simscale.com/forum/u/shenoy)\
**Post date:** [December 13, 2024, 3:13pm UTC](https://www.simscale.com/forum/t/inflate-boundary-layer-failure/99575/2 "2024-12-13T15:13:23Z")

</div>

Hey [hamish\_234](https://www.simscale.com/forum/u/hamish_234),

This is because you are using an extrusion mesh. With the [standard mesher](https://www.simscale.com/docs/simulation-setup/meshing/standard/), the boundary layer can only exist along the side faces (excluding the start and end faces) of an extrusion mesh. However, for some reason, I am unable to visualize the boundary layer within the cross sectional plane. I have already reported it to the team and we will get back to you as soon as a fix is released.

As a workaround for now, you could add the boundary layers without the presence of an extrusion mesh. Maybe change the default [general mesh settings](https://www.simscale.com/docs/simulation-setup/meshing/#general-mesh-settings) directly to have the desired elements and the boundary layer should work fine.

Let us know if you have any questions in the meanwhile! 🙂

Best,  
Satvik from SimScale

---

<div class="post-metadata">

**Author:** ![igaviano](https://www.simscale.com/forum/user_avatar/www.simscale.com/igaviano/32/73967_2.png) [@igaviano](https://www.simscale.com/forum/u/igaviano)\
**Post date:** [December 16, 2024, 8:43pm UTC](https://www.simscale.com/forum/t/inflate-boundary-layer-failure/99575/4 "2024-12-16T20:43:56Z")

</div>

Hi @hamish_234, @shenoy,

If I can add my input here, if what you’re going for is a “2D analysis” using the Empty2D boundary condition, I’d advise you not to gor for the extrusion mesh refinement but rather generate a 3D mesh, extrude it using ParaView+OpenFOAM and import it back in.

I go through the workflow in detail in this forum post:

- **[2D/3D optimized mesh](https://www.simscale.com/forum/t/2d-3d-optimized-mesh/99180)**

Cheers  
Igor
