# I'm new to this and idk what I'm doing wrong

**URL:** <https://www.simscale.com/forum/t/im-new-to-this-and-idk-what-im-doing-wrong/99878>\
**Category:** Project Support\
**Created:** [March 13, 2025, 8:09pm UTC](https://www.simscale.com/forum/t/im-new-to-this-and-idk-what-im-doing-wrong/99878 "2025-03-13T20:09:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vijayarvindr](https://www.simscale.com/forum/letter_avatar/vijayarvindr/32/6_449c533f586939b6e5f246632a46421f.png) [@vijayarvindr](https://www.simscale.com/forum/u/vijayarvindr)\
**Post date:** [March 13, 2025, 8:09pm UTC](https://www.simscale.com/forum/t/im-new-to-this-and-idk-what-im-doing-wrong/99878/1 "2025-03-13T20:09:16Z")

</div>

So essentially, I have a hollowed out blade and I want porous medium inside it. I managed to do it, but when I try to solve for airflow through the porous medium and over the blade’s surfaces, it throws this error:

“Multiple bodies with material assignments were detected. Because this is a single region simulation, only a single body may be assigned a material. Please review your material assignments and leave only the flow volume with a material.”

---

<div class="post-metadata">

**Author:** ![igaviano](https://www.simscale.com/forum/user_avatar/www.simscale.com/igaviano/32/73967_2.png) [@igaviano](https://www.simscale.com/forum/u/igaviano)\
**Post date:** [March 13, 2025, 9:02pm UTC](https://www.simscale.com/forum/t/im-new-to-this-and-idk-what-im-doing-wrong/99878/2 "2025-03-13T21:02:57Z")

</div>

Hi @vijayarvindr, thanks for posting on the forum and welcome to the SimScale Community 🤝

Usually when this issue happens there is more than one solid body in the domain for a single region analysis type (such as incompressible). Make sure you delete all the solids apart from the Flow region/advanced concepts. Maybe this tutorial is helpful in ilustrating the workflow:

- **[Aerodynamic Flow Behavior Around a Vehicle Tutorial | SimScale](https://www.simscale.com/docs/tutorials/aerodynamic-simulation-vehicle/#:~:text=Figure%208%3A%20The%20car%20must%20also%20be%20removed%20from%20the%20model%2C%20so%20only%20the%20flow%20region%20remains.)**

If you’d like to take a closer look at your project, please share the URL (here’s a guide teaching you how: **[Guide to Clear and Understandable Forum Posting](https://www.simscale.com/forum/t/guide-to-clear-and-understandable-forum-posting/99461)**).

Cheers  
Igor
