# I want to calculate the stress on the joint of the shaft.

**URL:** <https://www.simscale.com/forum/t/i-want-to-calculate-the-stress-on-the-joint-of-the-shaft/100192>\
**Category:** Project Support\
**Created:** [July 3, 2025, 8:02am UTC](https://www.simscale.com/forum/t/i-want-to-calculate-the-stress-on-the-joint-of-the-shaft/100192 "2025-07-03T08:02:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![a\_ishikawa](https://www.simscale.com/forum/letter_avatar/a_ishikawa/32/6_449c533f586939b6e5f246632a46421f.png) [@a\_ishikawa](https://www.simscale.com/forum/u/a_ishikawa)\
**Post date:** [July 3, 2025, 8:02am UTC](https://www.simscale.com/forum/t/i-want-to-calculate-the-stress-on-the-joint-of-the-shaft/100192/1 "2025-07-03T08:02:03Z")

</div>

The lower shaft is rotated ±90deg around the z-axis. I would like to know the stress on the joint when a resistance of 5N・m is applied to the upper shaft. Please tell me how to set it up.

> **[SimScale Login](https://www.simscale.com/workbench/?pid=9065191868835863209&mi=run%3A61%2Csimulation%3A53&mt=SIMULATION_RUN)**
>
> Log in to your SimScale account. SimScale makes high-fidelity engineering simulation technically and economically accessible. At any scale. In the cloud.

---

<div class="post-metadata">

**Author:** ![shenoy](https://www.simscale.com/forum/letter_avatar/shenoy/32/6_449c533f586939b6e5f246632a46421f.png) [@shenoy](https://www.simscale.com/forum/u/shenoy)\
**Post date:** [September 25, 2025, 10:11am UTC](https://www.simscale.com/forum/t/i-want-to-calculate-the-stress-on-the-joint-of-the-shaft/100192/2 "2025-09-25T10:11:26Z")

</div>

Hey @a_ishikawa ,

This sounds like a **[non-linear simulation with physical contacts](https://www.simscale.com/docs/simulation-setup/contacts/#nonlinear-contact)**.

[This tutorial](https://www.simscale.com/docs/tutorials/enclosure-snap-fit/) should be a good example from the overall simulation perspective. Of course, you would need to use [rotating boundary conditions (example tutorial)](https://www.simscale.com/docs/tutorials/bending-aluminum-pipe/#c-moving-roller-rotation) for the lower shaft.

 ![image](https://www.simscale.com/forum/uploads/default/original/3X/4/8/48c0a676f70aa4fd5cab30f8e67438fe53878dbd.png)

Cheers,  
Satvik

---

<div class="post-metadata">

**Author:** ![a\_ishikawa](https://www.simscale.com/forum/letter_avatar/a_ishikawa/32/6_449c533f586939b6e5f246632a46421f.png) [@a\_ishikawa](https://www.simscale.com/forum/u/a_ishikawa)\
**Post date:** [September 25, 2025, 11:35pm UTC](https://www.simscale.com/forum/t/i-want-to-calculate-the-stress-on-the-joint-of-the-shaft/100192/3 "2025-09-25T23:35:08Z")

</div>

Thank you.  
Simulation completed.
