# How to rescale Pedestrian Wind Comfort PWC Analysis results for reference wind speed

**URL:** <https://www.simscale.com/forum/t/how-to-rescale-pedestrian-wind-comfort-pwc-analysis-results-for-reference-wind-speed/96562>\
**Category:** Post-processing\
**Created:** [December 30, 2022, 10:11am UTC](https://www.simscale.com/forum/t/how-to-rescale-pedestrian-wind-comfort-pwc-analysis-results-for-reference-wind-speed/96562 "2022-12-30T10:11:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![aarafat\_7](https://www.simscale.com/forum/letter_avatar/aarafat_7/32/6_449c533f586939b6e5f246632a46421f.png) [@aarafat\_7](https://www.simscale.com/forum/u/aarafat_7)\
**Post date:** [December 30, 2022, 10:11am UTC](https://www.simscale.com/forum/t/how-to-rescale-pedestrian-wind-comfort-pwc-analysis-results-for-reference-wind-speed/96562/1 "2022-12-30T10:11:26Z")

</div>

**How to rescale Pedestrian Wind Comfort PWC Analysis results for reference wind speed**

The numerical simulation for PWC analysis are run with automatic calculation of the Wind Inlet conditions.

The wind inlet conditions are defined by the [Atmospheric Boundary Layer profile](https://www.simscale.com/docs/analysis-types/pedestrian-wind-comfort-analysis/wind-conditions/atmospheric-boundary-layer/). To calculate this for all PWC simulations a Reference wind speed of 10m/s at 10 m height is used based on the standards (see [Here](https://www.simscale.com/docs/analysis-types/pedestrian-wind-comfort-analysis/wind-conditions/atmospheric-boundary-layer/#:~:text=Reference%20velocity%20and%20height) ).

So the default results, [Average and Transient results for each wind direction](https://www.simscale.com/docs/tutorials/tutorial-pedestrian-wind-comfort/#average-result) are with respect to a reference of 10m/s wind speed at the inlet.

See the example result below:

 ![image](https://www.simscale.com/forum/uploads/default/original/3X/5/3/53fb208bf24ef7e58c5551d76f618b1da2191f1d.jpeg)

.

Now to re-scale your result to a different Inlet wind speed , for example 5 m/s and to know the local windspeeds based in the 5m/s reference , you can re-scale the results in the post-processor by using the ‘Calculator Filter’.

**Please Note: the re-scaling assumes that the flow remains fully turbulent at the lower wind speed also to have the same flow topology. so re-scaling to very low values e.g less than 4m/s may not give the true results.**

See the short Video below on how to do that:  
[LINK](https://www.loom.com/share/d609d523333b4cf8995138d889e24193)  
https://www.loom.com/embed/d609d523333b4cf8995138d889e24193

.  
**Please note:** when entering the calculator formula , you have to press Enter after each input.
