# How to import temperature distribution in load?

**URL:** <https://www.simscale.com/forum/t/how-to-import-temperature-distribution-in-load/22497>\
**Category:** Thermal\
**Created:** [May 12, 2016, 7:08am UTC](https://www.simscale.com/forum/t/how-to-import-temperature-distribution-in-load/22497 "2016-05-12T07:08:30Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![ahmedhussain18](https://www.simscale.com/forum/user_avatar/www.simscale.com/ahmedhussain18/32/140_2.png) [@ahmedhussain18](https://www.simscale.com/forum/u/ahmedhussain18)\
**Post date:** [May 12, 2016, 3:02pm UTC](https://www.simscale.com/forum/t/how-to-import-temperature-distribution-in-load/22497/3 "2016-05-12T15:02:08Z")

</div>

Hey @ytohi!

You can of course do that by either a formula or table upload. You can have a look at the forum post [here] ([Defining variable thermal boundary conditions](https://www.simscale.com/forum/t/defining-variable-thermal-boundary-conditions/22588)).

Hope this helps. If you have any question/s, feel free to ask.

Best Regards,

- Ahmed

---

_[View the full topic](https://www.simscale.com/forum/t/how-to-import-temperature-distribution-in-load/22497)._